|
To ensure the widest possible music-making
flexibility, the DJM-600 is equipped with an industry-first auto beat sampler. The sampler
easily and accurately samples phrases in a BPM-linked operation along with an improved
auto beat effector. In combination with Pioneer's CDJ Series, this advanced mixer gives
DJs everything they need to make party music really come alive.
Key Features:
AUTO BPM COUNTER
 Equipped with a counter that automatically
measures and digitally displays a track's BPMmeasurement range:
70-139 / 91-180 / 71-180 /
Manual
The DJM-600 provides a visual confirmation of
a track's tempo to allow the user to merge one song into another smoothly. Also, BPMs of
tracks that are difficult to measure can be manually input by tapping on the TAP button.
AUTO BEAT SAMPLER
 This is a new DJ function that allows
you to sample your favorite sources
and play them back easily at the touch
of a button. The BPM is measured
digitally and recorded automatically
exclusively for designated beats
( 1 / 2 / 4 / 8 / 16 )
beats,
Maximum interval: 6 seconds.
If set to the Stand-By mode when no sound is
present, the function
automatically starts and stops recording in response to the presence and absence of the
input signal and achieves the correct sampling with perfect timing. What's more, the user
can edit the end position, making possible a wide diversity of playback effects by making
use of three playback mode options and the cross fader start.
 Sampler
info:
Sampling rate: 44.1 kHz
Resolution: 16 bit stereo
A/D converter 20 bit
Sampling time 8 second
• SINGLE PLAY: Plays back the
recorded sound once only when the
button is being pressed.
• LOOP PLAY: Plays back the recorded
sound repeatedly when the button is pressed.
• STRETCH LOOP PLAY: Extends or shortens the recorded sound in
accordance with the mixed track's BPM and plays back the sound
repeatedly.
AUTO BEAT EFFECTOR
 Linked to BPM, the DJM-600 can add effects to each CH, MIC and
MASTER independently. The user can produce music that makes full use of high-level DJ
techniques by performing quick setting with the Beat Unit Switch button, adjusting the
precise time parameters, or controlling the balance between the effect sounds and the
original sounds by varying the mix ratio. Moreover, even when using the fader, it is
possible to leave just the effect sounds without linking to BPM.
• DELAY: Repeats a sound once. The
user can set the
delay to their desired tempo.
• ECHO: Repeats a sound several times. The user can set the echo
sound to their desired tempo.
• AUTO PAN: Automatically shifts the sound to the right and left.
Also capable of short auto pan sequences that would be impossible via manual operation.
• AUTO TRANS: Periodically cuts the sound.
• AUTO FILTER: Periodically varies the sound color.
• FLANGER: Periodically reproduces a sound effect resembling a jet
airplane ascending and descending.
• REVERB: Reproduces a reverberating sound effect.
• PITCH SHIFTER: Allows the interval to be freely varied throughout
a range of +/-1 octave. With this, the user can compensate for interval changes when using
analog turntables or for tempo changes when different makers' CD players are used.
Additionally, choruses can be made by employing mix ratios.
• EXTERNAL EFFECT INPUT (SEND/RETURN): Allows the user to connect
the mixer to an external effector or sampler, etc.
HEADPHONE MONITOR SPLIT
When the Headphone Output switch is set to MONO SPLIT, the right
channel becomes the master and the left channel becomes the CH sound.
Choosing
Plural with the headphone cue, the user can also hear mixed sound. Moreover, this function
can perform right and left level adjustment, thereby making monitoring easier.
FADER START PLAY
Connected to the CDJ Series, the DJM-600 can begin playback of a track using the sliding
cross fader or the channel fader. It can mix tracks without creating spaces by setting the
stand-by track's cue point and performing a single-action cut-in. Since it returns to the
cue point via the back fader alone, sampler-style playback is also possible. Start/back
play of sources recorded using the built-in sampler is also possible using the cross
fader.
EQUALIZERS
The DJM-600 is equipped with a separate HI/MID/LOW 3-band equalizer for each channel. This
arrangement allows the stress of the instrument sounds to be adjusted within the range
-26dB to +12dBfor an improvement of about 100% (Pioneer comparison) in sound extraction.
OTHER FUNCTIONS
• CROSS FADER CURVE: Choose from
three types of cross fader
start-up option.
• TALK OVER: Mutes -14db all levels apart from the microphone.
• PEAK LEVEL METER: Allows the user to instantly determine the
source input condition for each channel to make possible certain operation without loss
time.
• TRIM: Track input level composition is available. This function is
compatible with diverse sound sources.
• INDEPENDENT MONITOR SWITCH: Enables independent or
simultaneous monitoring of each CH, MIC, MASTER and EFFECT.
• BOOTH MONITOR OUTPUT: Utilizing independent output terminals for
booth monitor use, this function allows the sound volume to be independently controlled at
the upper surface.
• Recording outputs (RCA) (New)
• All faders, knobs, volume controls, buttons, etc., are made to professional-grade
SS-use high-durability specifications and designed to stand up to hard use.
|
